Blogs >> Technology >>
OUR CENTRE OF EXCELLENCE FOR TESTING OF CIVIL ENGINEERING MATERIALS
Testing of materials during construction is the mandatory requirement to achieve better quality. Barring few recognized testing laboratories in the city of Bangalore, there are not much of the facilities available at present to undertake testing of civil engineering materials as per relevant BIS codes and procedures.
It is under this context, “GOOLY CONSULTANCY SERVICES” has come forward to establish high quality testing laboratory with all modern and sophisticated testing equipments. The laboratory is fully equipped with machineries and is managed by the experts in the field of civil engineering, who have more than 30 years of rich experience in the construction sector. Fully trained technicians and operators are available for testing of materials strictly as per relevant BIS codes and as per the requirement of the client organisations at affordable cost.
Our Vision
To be the most competent & complete value added laboratory partner to our customer & to be the most admired services provider in construction sector& other sectors.
Our Mission
To deliver the right method of testing solutions as per BIS standards to customer products that satisfies end customer using emerging technologies to help our customer to achieve the business benefits at affordable prices.
Our Values
To ensure Customer satisfaction.
To enhance competence by nurturing our employees.
To pursue continuous perfection of our Knowledge, customer aligned business partner relationships.
To comply to the highest international standards of quality.
To comply with the National standards accrediation.
Quality Policy
We are committed to understand the customers testing needs and satisfy them by providing standardized laboratory testing services and improve continually through an established quality management system.
Services
Following facilities are available in the laboratory to perform the necessary tests.
Concrete Mix Design: (i) Mix design of concrete, (ii) Accelerated curing of cubes, (iii) Flexural strength design
Cement Concrete: (i) Compressive strength of cubes, (ii) Slump test, (iii) Flexural strength
Roofing Tiles: (i) Flexural strength, (ii) Water absorption, (iii) Warpage
Bricks: (i) Compressive strength, (ii) Water absorption, (iii) Efflorescence, (iv) Dimensional check
Precast Cement Concrete / Terrazzo Tiles: (i) Wet transverse strength, (ii) Resistance to wear, (iii) Water absorption, (iv) Warpage
Granite Stone: (i) Moisture content, (ii) Water absorption, (iii) Specific gravity, (iv) Compressive strength
Marble Stone / Kota Stone: (i) Water absorption test, (ii) Scartch hardness test on MOHS scale, (iii) Specific gravity
Block Board: (i) Density and thickness, (ii) Wear resistance, (iii) Adhesion of plies
Suspended matter: (i) Acidity, (ii) Alkalinity, (iii) PH Value
Gypsum Board: (i) Determination of mass, (ii) Transverse Strength, (iii) Resistance to Wear, (iv) Water absorption test
Water: (i) Organic solids, (ii) Inorganic solids, (iii) Sulphates, (iv) Chlorides
Ply Wood: (i) Moisture content, (ii) Glue shear strength in dry state, (iii) Water resistance test, (iv) Adhesion of plies
Veneered Particle Board: (i) Density, (ii) Moisture content, (iii) Water absorption, (iv) Swelling due to general absorption, (v) Swelling due to surface absorption, (vi) Water resistance test
Particle Board: (i) Density, (ii) Moisture content, (iii) Water absorption, (iv) Swelling due to general absorption, (v) Swelling due to surface absorption, (vi) Screw withdrawal test
Glazed / Ceramic Tiles: (i) Flexural strength, (ii) Water absorption test, (iii) Impact test, (iv) Crazing test, (v) Chemical test, (vi) Scartch hardness test on MOHS score
Steel: (i) Tensile strength, (ii) Tensile strength with proof stress, (iii) Elongation test, (iv) Bend test, (v) Re-bend test
Cement: (i) Compressive strength - 3, 7 & 28 days, (ii) Normal consistency, (iii) Initial & final setting time, (iv) Soundness (Lechatalier), (v) Fineness (Blains)
Cement Bonded Particle Board: (i) Density, (ii) Moisture content, (iii) Water absorption, (iv) Swelling due to general absorption, (v) Screw withdrawal Test
Flush Door Shutter: (i) End immersion test, (ii) Knife test, (iii) Glue adhesion test
Precast Cement Concrete Chequerred Tiles: (i) Wet transverse strength, (ii) Resistance to wear, (iii) Water absorption
Pre Laminated Particle Board: (i) Density, (ii) Moisture content, (iii) Water absorption, (iv) Swelling due to general absorption, (v) Screw withdrawal Test
Aggregates (Coarse and fine): (i) Aggregate crushing value, (ii) Aggregate ten percent value, (iii) Aggregate impact value, (iv) Aggregate los angeles abrasion value, (v) Specific gravity of aggregates, (vi) Water absorption of aggregates, (vii) Sieve analysis of coarse aggregates, (viii) Sieve analysis of fine aggregates, (ix) Material finer than 75 micron, (x) Flakiness Index / Elongation index, (xi) Silt content by volume, (xii) Bulking of sand, (xiii) Stripping value
Paver Blocks: (i) Compressive strength, (ii) Water absorption
Timber: (i) Moisture content, (ii) Identification of wood
Our Testing laboratory is having NABL accreditation and ISO9001:2008 Certification. Many Government Organizations have approved our laboratory. We are already providing Project Management Consultancy Services for various Government Organization like BBMP, CPWD, PWD, District Offices, Military Engineering Services, Railways and District Urban Infrastructure works.
Architects, Builders, Contractors and Others are requested to get in touch with our Civil Engineer B S Ranganath (e-mail: ranganath@goolyconsultancyservices.com, Mob: 9845309125) for rest of the informations.
* * * * *
It is under this context, “GOOLY CONSULTANCY SERVICES” has come forward to establish high quality testing laboratory with all modern and sophisticated testing equipments. The laboratory is fully equipped with machineries and is managed by the experts in the field of civil engineering, who have more than 30 years of rich experience in the construction sector. Fully trained technicians and operators are available for testing of materials strictly as per relevant BIS codes and as per the requirement of the client organisations at affordable cost.
Our Vision
To be the most competent & complete value added laboratory partner to our customer & to be the most admired services provider in construction sector& other sectors.
Our Mission
To deliver the right method of testing solutions as per BIS standards to customer products that satisfies end customer using emerging technologies to help our customer to achieve the business benefits at affordable prices.
Our Values
To ensure Customer satisfaction.
To enhance competence by nurturing our employees.
To pursue continuous perfection of our Knowledge, customer aligned business partner relationships.
To comply to the highest international standards of quality.
To comply with the National standards accrediation.
Quality Policy
We are committed to understand the customers testing needs and satisfy them by providing standardized laboratory testing services and improve continually through an established quality management system.
Services
Following facilities are available in the laboratory to perform the necessary tests.
Concrete Mix Design: (i) Mix design of concrete, (ii) Accelerated curing of cubes, (iii) Flexural strength design
Cement Concrete: (i) Compressive strength of cubes, (ii) Slump test, (iii) Flexural strength
Roofing Tiles: (i) Flexural strength, (ii) Water absorption, (iii) Warpage
Bricks: (i) Compressive strength, (ii) Water absorption, (iii) Efflorescence, (iv) Dimensional check
Precast Cement Concrete / Terrazzo Tiles: (i) Wet transverse strength, (ii) Resistance to wear, (iii) Water absorption, (iv) Warpage
Granite Stone: (i) Moisture content, (ii) Water absorption, (iii) Specific gravity, (iv) Compressive strength
Marble Stone / Kota Stone: (i) Water absorption test, (ii) Scartch hardness test on MOHS scale, (iii) Specific gravity
Block Board: (i) Density and thickness, (ii) Wear resistance, (iii) Adhesion of plies
Suspended matter: (i) Acidity, (ii) Alkalinity, (iii) PH Value
Gypsum Board: (i) Determination of mass, (ii) Transverse Strength, (iii) Resistance to Wear, (iv) Water absorption test
Water: (i) Organic solids, (ii) Inorganic solids, (iii) Sulphates, (iv) Chlorides
Ply Wood: (i) Moisture content, (ii) Glue shear strength in dry state, (iii) Water resistance test, (iv) Adhesion of plies
Veneered Particle Board: (i) Density, (ii) Moisture content, (iii) Water absorption, (iv) Swelling due to general absorption, (v) Swelling due to surface absorption, (vi) Water resistance test
Particle Board: (i) Density, (ii) Moisture content, (iii) Water absorption, (iv) Swelling due to general absorption, (v) Swelling due to surface absorption, (vi) Screw withdrawal test
Glazed / Ceramic Tiles: (i) Flexural strength, (ii) Water absorption test, (iii) Impact test, (iv) Crazing test, (v) Chemical test, (vi) Scartch hardness test on MOHS score
Steel: (i) Tensile strength, (ii) Tensile strength with proof stress, (iii) Elongation test, (iv) Bend test, (v) Re-bend test
Cement: (i) Compressive strength - 3, 7 & 28 days, (ii) Normal consistency, (iii) Initial & final setting time, (iv) Soundness (Lechatalier), (v) Fineness (Blains)
Cement Bonded Particle Board: (i) Density, (ii) Moisture content, (iii) Water absorption, (iv) Swelling due to general absorption, (v) Screw withdrawal Test
Flush Door Shutter: (i) End immersion test, (ii) Knife test, (iii) Glue adhesion test
Precast Cement Concrete Chequerred Tiles: (i) Wet transverse strength, (ii) Resistance to wear, (iii) Water absorption
Pre Laminated Particle Board: (i) Density, (ii) Moisture content, (iii) Water absorption, (iv) Swelling due to general absorption, (v) Screw withdrawal Test
Aggregates (Coarse and fine): (i) Aggregate crushing value, (ii) Aggregate ten percent value, (iii) Aggregate impact value, (iv) Aggregate los angeles abrasion value, (v) Specific gravity of aggregates, (vi) Water absorption of aggregates, (vii) Sieve analysis of coarse aggregates, (viii) Sieve analysis of fine aggregates, (ix) Material finer than 75 micron, (x) Flakiness Index / Elongation index, (xi) Silt content by volume, (xii) Bulking of sand, (xiii) Stripping value
Paver Blocks: (i) Compressive strength, (ii) Water absorption
Timber: (i) Moisture content, (ii) Identification of wood
Our Testing laboratory is having NABL accreditation and ISO9001:2008 Certification. Many Government Organizations have approved our laboratory. We are already providing Project Management Consultancy Services for various Government Organization like BBMP, CPWD, PWD, District Offices, Military Engineering Services, Railways and District Urban Infrastructure works.
Architects, Builders, Contractors and Others are requested to get in touch with our Civil Engineer B S Ranganath (e-mail: ranganath@goolyconsultancyservices.com, Mob: 9845309125) for rest of the informations.
* * * * *
|
|
