Today, in most of the group of houses (say 5 houses) having single bore with single water pump & each houses with one water tank. For filling someone’s house water tank, the person who stays in the house has to go the place called control room, which is situated inside the campus of that group of houses, where the power directing switch for motor pump and water directing pipe valves to the respective tanks are mounted. Then the person has to change the position of the power switch for the purpose of using power supply only from his/her house and change the position of the pipe valves in order to direct the water only to his/her house tank. If the tank is over flown, the person has to detect and switch off the motor pump immediately. By the above procedure everyone has to fill up their respective tanks when they need water. These above difficulties are avoided by implementing power pack water management system. This project keeps the user away from controlling those things manually& makes their life easier. This system has master control. It has preprogrammed controller, which controls the entire activities.

These are the functions of Power Pack water management system, first it identifies which house’s tank is empty, Then it directs power from that house to motor pump simultaneously controls the solenoid valves for directing water to that particular house tank, when the tank has reached the full level, it switches off the power to the motor pump or stops filling to that tank and moves to next tank, when two or more tank is empty, this system fills the tank one by one. Also it indicates to every house that which house is using the motor pump currently via glowing respective indicator in the wireless receiver fixed at every house.