Maintenance Of Dos Partition Could Not Start
Sign in

Maintenance of Dos partition could not start

information managemant
1. The hard disk containing the dos primary partition has not been activated, the hard disk to start the machine due to the activities of the dos can not partition, the screen appears: no? Rom? Basic?? System? Balted?? To use floppy disks, run the fdisk command, set the c drive the active dos partition can be troubleshooting.

2, coms?? Setup in the hard work mode lba, auto.normal.large of four, the system default lba mode, this mode. The drive parameter settings must be consistent with the actual use of the model, the parameters of the hard disk is set correctly, otherwise, the hard disk will fail to start, the screen prompts; invalid? System? Disk? Replace? The? Disk, and? Then? Press? any? key at this time either hit a key to enter the cmos? setup menu and check the hard disk parameters are correct, the parameter does not match re-setting, archiving that is able to use the hard disk to start.

3, misuse the system leading to loss of jobs dos virus destroyed the master boot sector dos data on the hard disk can not start the machine, there will be missing? Operating? System error, floppy boot, can not access c drive, and the emergence of: incalid? Drive ? specification? invalid drive. This is because the virus interference, the use of legitimate kv300 virus virus, the use of legitimate kv300 revert to the original dos-led sectors cited data, this method does not affect the hard disk storage procedures, documentation. hard drive repair. Format hard drive. Hard disk data recovery. Partition hard drive. Hard drive failure. Hard drive upgrade. backup Hard drive.
prevnew
start_blog_img